69638A
1.REMOVE CENTER NO. 1 DOOR REMOTE CONTROL COVER
Using a clip remover, detach the clip.
Detach the 2 clips and remove the center No. 1 door remote control cover.
67676
2.REMOVE FRONT SIDE TRIM BOARD COVER LH
85620
3.REMOVE AUTOMATIC DOOR REGULATOR MOTOR ASSEMBLY
Disconnect the control link cable.
| *1 | Control Link Cable |
Remove the 6 bolts.
Disconnect the 2 connectors and remove the automatic door regulator motor assembly.
When carrying the automatic door regulator motor assembly, do not hold the automatic door regulator link, center door remote control link sub-assembly or wire harness. Instead, carry it by holding the main automatic door regulator motor assembly unit.
Removing the automatic door regulator motor assembly from the vehicle must be performed by multiple people.