Home › Vehicle Interior › ENGINE HOOD / DOOR › AUTO CENTER DOOR UNIT (for Folding Type)
RM2850E _58 Vehicle Interior _073213 ENGINE HOOD / DOOR _0356368 AUTO CENTER DOOR UNIT(for Folding Type) A

ENGINE HOOD / DOOR  AUTO CENTER DOOR UNIT(for Folding Type)  INSTALLATION  


PROCEDURE

Hide 85620 1.INSTALL AUTOMATIC DOOR REGULATOR MOTOR ASSEMBLY

NOTICE:
·

When carrying the automatic door regulator motor assembly, do not hold the automatic door regulator link, center door remote control link sub-assembly or wire harness. Instead, carry it by holding the main automatic door regulator motor assembly unit.

·

Removing the automatic door regulator motor assembly from the vehicle must be performed by multiple people.



a.

Connect the 2 connectors.


b.

Install the 6 bolts to the automatic door regulator motor assembly.


c.

Connect the control link cable.


Hide 67676 2.INSTALL FRONT SIDE TRIM BOARD COVER LH

Hide 69638A 3.INSTALL CENTER NO. 1 DOOR REMOTE CONTROL COVER

a.

Attach the 2 clips.


b.

Install the clip to the center No. 1 door remote control cover.