Home › Vehicle Interior › EXTERIOR › BACK DOOR OUTSIDE GARNISH(for Double Swing Out Type)
RM2850E _58 Vehicle Interior _073214 EXTERIOR _0356386 BACK DOOR OUTSIDE GARNISH(for Double Swing Out Type) A

EXTERIOR  BACK DOOR OUTSIDE GARNISH(for Double Swing Out Type)  REASSEMBLY  


PROCEDURE

Hide 76825 1.INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR

HINT:

When installing the back door outside garnish protector, heat the back door outside garnish using a heat light.


Item Temperature
Back Door Outside Garnish 20 to 30 °C (68 to 86 °F)

NOTICE:

Do not heat the back door outside garnish excessively.


a.

Clean the back door outside garnish protector surface.

i.

Using heat light heat the back door outside garnish surface.


ii.

Remove the double sided tape from the back door outside garnish surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Apply primer to the back door outside garnish protector installation area on the back door outside garnish.

NOTICE:

Do not apply primer excessively.



c.

Remove the peeling paper on a new back door outside garnish protector while making sure not to touch the adhesional surface.


d.

Install the back door outside garnish protector as shown in the illustration.

B460172E01
4.927,2.396 4.802,2.396 4.802,2.396 4.76,2.135 true 2.729,2.385 2.521,2.385 2.521,2.385 2.354,2.156 true 3.625,0.615 3.771,0.333 3.771,0.333 3.99,0.333 true 4.073,0.281 4.333,0.49 0.26,0.208 10 false *a 2.771,2.302 2.969,2.479 0.198,0.177 10 false *a 4.948,2.313 5.146,2.49 0.198,0.177 10 false *a 2.063,3.375 2.323,3.563 0.26,0.188 10 false *b 5.135,3.271 5.323,3.458 0.188,0.188 10 false *b 1.521,3.094 1.781,3.281 0.26,0.188 10 false *c 4.281,3.094 4.542,3.281 0.26,0.188 10 false *c

*a Specified Installation *b 2.0 mm (0.079 in.)
*c Installation Range - -

NOTICE:

After the primer dries (approximately 3 minutes), install the back door outside garnish protector.


HINT:

Firmly press the back door outside garnish protector to attach it.



Hide 86790D 2.INSTALL TELEVISION CAMERA ASSEMBLY RR (w/ Rear Monitor)

Hide 81270 3.INSTALL LICENSE PLATE LIGHT ASSEMBLY