Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE FLUID (w/ Brake pedal Load Sensing Switch) › 2017.01–2021.01
RM2850E _54 Brake _073226 BRAKE SYSTEM (OTHER) _0356437 BRAKE FLUID(w/ Brake pedal Load Sensing Switch) G

BRAKE SYSTEM (OTHER)  BRAKE FLUID(w/ Brake pedal Load Sensing Switch)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT BRAKE FLUID LEVEL IN RESERVOIR

a.

Remove the reservoir tank door (Click hereVehicle Interior>INTERIOR PANEL>INSTRUMENT PANEL SAFETY PAD>REMOVAL).


b.
C392441E01
2.219,1.854 2.458,1.854 2.458,1.854 2.625,2.167 true 2.25,2.781 2.469,2.781 2.469,2.781 2.646,2.417 true 2.052,1.76 2.271,1.958 0.219,0.198 10 false *a 2.094,2.688 2.271,2.906 0.177,0.219 10 false *b

Check the fluid level.

If the brake fluid level is lower than the MIN line, inspect for brake fluid leaks and brake pad wear. If necessary, refill the reservoir with brake fluid to the MAX line after repair or replacement.

Text in illustration
*a MAX line
*b MIN line

Brake Fluid:

SAE J1703 or FMVSS No. 116 DOT3

SAE J1704 or FMVSS No. 116 DOT4


NOTICE:

If using a dropper to adjust the fluid amount, make sure that the dropper has not been used with mineral oils, water or deteriorated brake fluid. Sealed areas may deteriorate and lead to fluid leaks, or the fluid may deteriorate and lead to decreased efficiency.


HINT:

The brake fluid level must always be adjusted to the MAX line.



c.