29303
1.INSTALL VACUUM PUMP ROTOR SUB-ASSEMBLY
Apply engine oil to the vacuum pump rotor sub-assembly.
Install the vacuum pump rotor sub-assembly to the vacuum pump end cover sub-assembly.
Install the vacuum pump rotor sub-assembly in the correct direction.
29331A
2.INSTALL VACUUM PUMP VANE
Put the vacuum pump assembly in a vise between aluminum plates.
Do not tighten the vise.
Do not damage the vacuum pump assembly.
Apply engine oil to the vacuum pump vane and install to the vacuum pump rotor sub-assembly.
| *a | Outward |
When reusing the vacuum pump rotor sub-assembly and vacuum pump vanes, install them in the same position and orientation as when they were removed.
3.INSTALL VACUUM PUMP HOUSING
Inspect the vacuum pump rotor sub-assembly and vacuum pump vanes.
Make sure that the vacuum pump vanes are flush with the rotor surface.
| *1 | Vacuum Pump Vane |
Install the vacuum pump housing to the vacuum pump end cover sub-assembly with a new O-ring and 2 bolts.
7.0 N*m (71 kgf*cm, 62 in.*lbf)
Do not damage the O-ring.
Firmly insert the vacuum pump vanes into the vacuum pump housing.
4. TEMPORARILY INSTALL CHECK VALVE SUB-ASSEMBLY
Temporarily install the check valve sub-assembly to the vacuum pump assembly with a new gasket.
Tighten the check valve sub-assembly when install the vacuum pump assembly.
29300
5.INSPECT VACUUM PUMP ASSEMBLY