29300
1.INSTALL VACUUM PUMP ASSEMBLY
Install the vacuum pump assembly with a new O-ring and 2 nuts.
55 N*m (561 kgf*cm, 41 ft.*lbf)
Do not damage the O-ring.
29369
2.TIGHTEN CHECK VALVE SUB-ASSEMBLY
Tighten the check valve sub-assembly.
32.5 N*m (331 kgf*cm, 24 ft.*lbf)
Perform this step only when the vacuum pump assembly has been disassembled.
29601B
3.INSTALL VACUUM PUMP OIL PIPE SUB-ASSEMBLY
Install the vacuum pump oil pipe with 3 new gasket, 2 union bolts and the bolt.
| *1 | Bolt |
| *2 | Union Bolt |
20 N*m (204 kgf*cm, 15 ft.*lbf)
4.INSTALL VACUUM PIPE