51441D
1.REMOVE NO. 1 ENGINE UNDER COVER
51445D
2.REMOVE ENGINE UNDER COVER BRACKET RH
51446C
3.REMOVE ENGINE UNDER COVER BRACKET LH
53711C
4.REMOVE FRONT FENDER APRON RH
Remove the 7 bolts and the front fender apron RH.
25608
5.REMOVE EGR COOLER SUB-ASSEMBLY
46700
6.REMOVE EXHAUST RETARDER ASSEMBLY
17113D
7.REMOVE NO. 1 INTAKE PIPE
Loosen the hose clamp of the No. 1 air hose.
Remove the bolt, 2 nuts, No. 1 intake pipe and gasket.
17030
8.SEPARATE AIR HOSE ASSEMBLY
Detach the 2 wire harness clamps.
Slide the clamp and disconnect the PCV hose from the air hose assembly.
Loosen the hose clamp.
Remove the bolt and separate the air hose assembly from the turbocharger sub-assembly.
16895
9.REMOVE NO. 1 TURBO WATER PIPE
Remove the union bolt and 2 gaskets.
Remove the bolt and No. 1 turbo water pipe.
Remove the O-ring from the No. 1 turbo water pipe.
15407
10.REMOVE TURBO OIL INLET PIPE SUB-ASSEMBLY
Disconnect the engine oil pressure switch assembly connector.
Detach the wire harness clamp.
Remove the 2 union bolts and 4 gaskets.
Remove the bolt and turbo oil inlet pipe sub-assembly.
16028
11.REMOVE NO. 2 TURBO WATER PIPE SUB-ASSEMBLY
Remove the 2 union bolts, 4 gaskets and No. 2 turbo water pipe sub-assembly.
15474
12.REMOVE TURBO OIL OUTLET PIPE
Remove the 2 bolts and disconnect the coolant by-pass pipe sub-assembly from the turbo oil outlet pipe.
| *1 | Coolant By-pass Pipe Sub-assembly |
Remove the 2 bolts, 2 gaskets and turbo oil outlet pipe.
17271
13.REMOVE NO. 1 TURBO INSULATOR
Remove the 3 bolts and No. 1 turbo insulator.
17201
14.REMOVE TURBOCHARGER SUB-ASSEMBLY
Disconnect the turbocharger sub-assembly control actuator connector.
Remove the 4 nuts, 4 spacers, turbocharger sub-assembly and gasket.
Replace the 6 stud bolts.
If a stud bolt is deformed or the threads are damaged, replace it.