Home › Engine / Hybrid System › N04C-VQ (EMISSION CONTROL) › EGR COOLER › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073146 N04C-VQ EMISSION CONTROL _0355925 EGR COOLER A

N04C-VQ EMISSION CONTROL  EGR COOLER  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 58521D 2.REMOVE ENGINE SERVICE HOLE COVER MAT

Hide 58410 3.REMOVE ENGINE SERVICE HOLE COVER

Hide 58734B 4.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58420 5.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY

Hide 58123A 6.REMOVE SHIFT AND SELECT LEVER SUPPORT WITH BOOTS

Hide 33506F 7.REMOVE FLOOR SHIFT CONTROL SHIFT LEVER RETAINER SUB-ASSEMBLY

Hide 58701A 8.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY

Hide 16206 10.SEPARATE WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A260909

Separate the 2 water by-pass hoses.


b.
A403150

Remove the 5 bolts and separate the water by-pass pipe sub-assembly.


Hide 44360 12.SEPARATE VANE PUMP OIL RESERVOIR ASSEMBLY

Hide 44379A 13.REMOVE NO. 2 OIL RESERVOIR BRACKET

Hide 11409 14.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

a.
A260602

Disconnect the 2 wire harness clamps.


b.
A262276

Remove the bolt and engine oil level dipstick guide.


c.

Remove the O-ring from the engine oil level dipstick guide.


Hide 17410 15.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 17271 16.REMOVE NO. 3 EXHAUST PIPE HEAT INSULATOR SUB-ASSEMBLY

a.
A265620

Remove the 4 bolts and No. 3 exhaust pipe heat insulator sub-assembly.


Hide 17271 17.REMOVE NO. 4 EXHAUST PIPE HEAT INSULATOR SUB-ASSEMBLY

a.
A265621

Remove the 3 bolts and No. 4 exhaust pipe heat insulator sub-assembly.


Hide 17505H 18.REMOVE NO. 2 EXHAUST PIPE HEAT INSULATOR SUB-ASSEMBLY

a.
A255748

Remove the 2 bolts and No. 2 exhaust pipe heat insulator sub-assembly.


Hide 25608 19.REMOVE EGR COOLER SUB-ASSEMBLY

a.
A255749

Remove the 2 bolts and gasket.


b.
A260339

Disconnect the water by-pass hose and reserve tank hose.


c.

Disconnect the No. 1 water by-pass hose and No. 2 water by-pass hoses.


d.

Remove the 4 bolts, EGR cooler sub-assembly and gasket.


Hide 25611 20.REMOVE EGR PIPE CONNECTOR

a.
A255750

Remove the 3 nuts and 3 spacers.


b.

Remove the EGR pipe connector and gasket.


Hide 17505G 21.REMOVE NO. 1 EXHAUST PIPE HEAT INSULATOR SUB-ASSEMBLY

a.
A257809

Remove the 3 bolts and No. 1 exhaust pipe heat insulator sub-assembly from the EGR cooler sub-assembly.