Home › Engine / Hybrid System › 2TR-FE FUEL › FUEL TANK
RM2850E _51 Engine / Hybrid System _073289 2TR-FE FUEL _0356963 FUEL TANK A

2TR-FE FUEL  FUEL TANK  INSTALLATION  


PROCEDURE

Hide 77651A 1.INSTALL NO. 1 FUEL TANK CUSHION

a.
A101687

Install 9 new No. 1 cushions onto the fuel tank as shown in the illustration.


Hide 77011 2.INSTALL LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY

a.
A183404

Install a new gasket and the lower fuel tank filler pipe sub-assembly with the 8 screws.


Hide 77254D 3.INSTALL BREATHER TUBE FUEL HOSE

a.
A183405E01
0.883,0.144 1.089,0.282 0.206,0.139 10 Up 0.641,1.283 1.022,1.424 0.38,0.141 10 110°

Install the breather tube fuel hose onto the lower fuel tank filler pipe.


Hide 77213B 4.INSTALL FUEL TANK TO FILLER PIPE HOSE

a.
A183406E01
0.789,0.152 0.985,0.296 0.196,0.144 10 Up 0.395,1.165 0.713,1.307 0.318,0.142 10 90°

Install the fuel tank to filler pipe hose onto the lower fuel tank filler pipe.


Hide 77420 5.INSTALL NO. 2 FUEL CUT OFF VALVE ASSEMBLY

a.
A183401

Install the No. 2 fuel cut off valve onto the fuel tank.


Hide 77380 6.INSTALL FUEL CUT OFF VALVE ASSEMBLY

a.
A183400

Install the fuel cut off valve onto the fuel tank.


Hide 77026A 7.INSTALL NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY

a.
A146782

Install 2 new gaskets and the No. 1 fuel evaporation tube with the 8 screws and nut.

Torque:

3.0 N*m (31 kgf*cm, 27 in.*lbf)



Hide 83320 8.INSTALL FUEL SENDER GAGE ASSEMBLY

a.

Install a new gasket and the fuel sender gauge with the 5 screws.


b.

Install the 3 wire harness clamps.


Hide 77203A 9.INSTALL FUEL SUCTION TUBE SUB-ASSEMBLY

Hide 77100 10.INSTALL FUEL TANK ASSEMBLY

a.

Set the fuel tank on a transmission jack.


b.

Raise the jack.


c.
A146779

Connect the 2 fuel tank bands with the 2 bolts.

Torque:

45 N*m (459 kgf*cm, 33 ft.*lbf)



d.

Connect the 2 connectors and the 4 clamps.


Hide 77254D 11.CONNECT BREATHER TUBE FUEL HOSE

a.
A146790E07
0.594,1.177 0.99,1.417 0.396,0.24 10 false 110° 0.635,0.208 0.896,0.448 0.26,0.24 10 false Up

Connect the breather tube fuel hose.


Hide 77213B 12.CONNECT FUEL TANK TO FILLER PIPE HOSE

a.
A146791E06
0.615,1.177 1.01,1.417 0.396,0.24 10 false 90° 0.604,0.135 0.906,0.427 0.302,0.292 10 false Up

Connect the fuel tank to filler pipe hose.


Hide 77254D 13.CONNECT FUEL MAIN HOSE

a.
A388473

connect the fuel main hose.

i.
A299346E02
2.323,1.854 2.469,1.854 2.469,1.854 2.552,1.542 false 2.156,1.75 2.469,1.948 0.313,0.198 10 false *a

Align the axis of the fuel tube connector with the fuel pipe. Connect the fuel tube connector to the pipe, and then push up the retainer.

Text in Illustration
*a Retainer
V100135

Insert
V100136

Push



Hide 77254D 14.CONNECT FUEL RETURN HOSE

a.
A388472

Connect the fuel return hose.


Hide 77254D 15.CONNECT FUEL HOSE

a.
A388471

Connect the fuel check valve hose.


Hide 16.BLEED AIR FROM FUEL SYSTEM

Hide 17.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL