When a malfunction cannot be confirmed by checking DTCs, troubleshooting should be performed on all circuits that are possible causes of the problem. However, in most cases, performing the basic engine check shown below can help you find the problem quickly and efficiently. Always perform this check first when troubleshooting the engine.
Check the battery voltage with the engine stopped and the ignition switch off.
| Result | Proceed to |
|---|---|
| 11 V or higher | OK |
| Below 11 V | NG |
OK
NG
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Visually check that the air cleaner filter element sub-assembly is not excessively contaminated with dirt or oil.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check that only diesel fuel is being used.
Check that the fuel does not contain any impurities.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check that the fuel pipes and fuel hoses are not clogged, damaged, disconnected or bent.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
| Proceed to |
|---|
| OK |
| NG |
OK
NG
| Proceed to |
|---|
| OK |
| NG |
OK
NG
| Proceed to |
|---|
| OK |
| NG |
OK
NG
If the result not as specified. perform troubleshooting according to the symptoms table.
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| OK |
| NG |
OK
NG
| Proceed to |
|---|
| OK |
| NG |
OK
NG