27020
1.INSTALL GENERATOR ASSEMBLY
Temporarily install the generator assembly onto the engine.
Install the generator bracket with the 2 bolts.
125 N*m (1275 kgf*cm, 92 ft.*lbf)
Install the generator assembly with the 2 bolts.
55 N*m (561 kgf*cm, 41 ft.*lbf)
Install the 2 wire harnesses with the 2 bolts to the generator bracket.
8.0 N*m (82 kgf*cm, 71 in.*lbf)
Connect the connector to the generator assembly.
Install the wire harness to terminal B with the nut, and install the terminal cap.
10 N*m (102 kgf*cm, 7 ft.*lbf)
Connect the 4 wire harness clamps.
17113
2.INSTALL INTAKE PIPE
16206C
3.INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY
16701
4.INSTALL FAN SHROUD SUB-ASSEMBLY
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3.9 N*m (40 kgf*cm, 35 in.*lbf)