1.REMOVE FRONT WHEEL
2.REMOVE NO. 1 ENGINE UNDER COVER (for Plastic Type)
48810
3.REMOVE FRONT STABILIZER LINK ASSEMBLY LH
Remove the 2 nuts and front stabilizer link assembly LH.
If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud in place.
48820B
4.REMOVE FRONT STABILIZER LINK ASSEMBLY RH
Use the same procedures described for the LH side.
48811
5.REMOVE FRONT STABILIZER BAR
Remove the 4 bolts and front stabilizer bar from the vehicle body.
48815
6.REMOVE FRONT NO. 1 STABILIZER BAR BUSH
Remove the 2 front No. 1 stabilizer bar bushes and 2 front stabilizer bracket covers from the front stabilizer bar.