1. JACK UP AND SUPPORT FRAME ON STANDS
2.REMOVE FRONT WHEEL
48520
3.DISCONNECT SHOCK ABSORBER
Support the lower arm with a jack.
Hold the shock absorber rod, and remove the lock nut, set nut, retainer, cushion and disconnect shock absorber.
4. DISCONNECT STEERING KNUCKLE
Disconnect the brake hose bracket from the steering knuckle.
Remove the cotter pin from the upper ball joint.
Loosen the upper ball joint nut.
Only loosen the nut until SST can be caught, do not remove it.
Using SST, disconnect the steering knuckle.
Remove the upper ball joint nut.
Lower the lower arm and disconnect the shock absorber upper side and steering knuckle.
48520
5.REMOVE SHOCK ABSORBER
Remove the nut, bolt and shock absorber.
Remove following parts:
Retainers
Cushion