48520
1.INSTALL SHOCK ABSORBER
Install the following parts:
Cushion
Retainers
Install the shock absorber lower to the lower suspension arm with the bolt and nut.
Tighten the shock absorber lower nut.
69 N*m (700 kgf*cm, 51 ft.*lbf)
2.CONNECT STEERING KNUCKLE AND SHOCK ABSORBER
Jack up the lower arm, and connect the shock absorber and steering knuckle.
Install and tighten the upper ball joint nut.
170 N*m (1,700 kgf*cm, 126 ft.*lbf)
Install a new cotter pin.
Install the brake hose bracket to the steering knuckle.
Install the cushion and retainers with the new nut.
Hold the shock absorber rod, and tighten the shock absorber upper nut.
69 N*m (700 kgf*cm, 51 ft.*lbf)
3.INSTALL FRONT WHEEL AND LOWER VEHICLE