1. JACK UP AND SUPPORT FRAME ON STANDS
2.REMOVE FRONT WHEEL
48162
3.REMOVE TORSION BAR SPRING
4.DISCONNECT STEERING KNUCKLE
Remove the bolt and disconnect the brake tube bracket from the steering knuckle.
Remove the cotter pin.
Loosen the upper ball joint nut.
Only loosen the nut, do not remove it.
Using SST, disconnect the steering knuckle from the upper ball joint.
Remove the upper ball joint nut.
48067
5.REMOVE UPPER SUSPENSION ARM
Remove the 4 nuts, washers, bolts and upper suspension arm.