1.INSTALL UPPER BALL JOINT
Install the upper ball joint with the bolts and nuts.
230 N*m (2,300 kgf*cm, 170 ft.*lbf)
2.CONNECT STEERING KNUCKLE
Jack up the lower arm, and connect the steering knuckle.
Install and torque the upper ball joint nut.
170 N*m (1,700 kgf*cm, 126 ft.*lbf)
Install a new cotter pin.
Install the brake hose bracket to the steering knuckle.
3.INSTALL LOWER BALL JOINT
Assemble the lower suspension atm.
Click hereSuspension>FRONT SUSPENSION>FRONT LOWER SUSPENSION ARM>REASSEMBLY
Install the lower suspension arm.
Click hereSuspension>FRONT SUSPENSION>FRONT LOWER SUSPENSION ARM>INSTALLATION
4.INSTALL FRONT WHEEL AND LOWER VEHICLE