Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › FRONT SPEED SENSOR (w/ Brake pedal Load Sensing Switch) › 2017.01–2021.01
RM2850E _54 Brake _073264 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0358156 FRONT SPEED SENSOR(w/ Brake pedal Load Sensing Switch) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  FRONT SPEED SENSOR(w/ Brake pedal Load Sensing Switch)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

The procedure listed below is for the LH side.

·

Other than areas where instructions are provided, use the same procedure for the RH and LH sides.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.REMOVE FRONT SPEED SENSOR LH

a.

Disconnect the connector.

C370922E01
0.115,0.094 0.427,0.292 0.313,0.198 10 false *A 3.479,0.115 3.792,0.313 0.313,0.198 10 false *B

Text in Illustration
*A for N04C-UH, N04C-VL, N04C-VQ *B for 2TR-FE


b.

Remove the 2 bolts and disconnect the speed sensor bracket from the body.


c.

for RH side (N04C-UH, N04C-VL and N04C-VQ):

i.

Disconnect the connector and 2 clamps.

C370923E01
0.073,0.042 0.385,0.24 0.313,0.198 10 false *a 3.625,0.042 3.938,0.24 0.313,0.198 10 false *b

Text in Illustration
*a except N04C-UH *b for N04C-UH


ii.

Remove the 2 bolts and speed sensor bracket from the body.



d.

for RH side (2TR-FE):

i.
C370924

Disconnect the connector.


ii.

Remove the 2 bolts and speed sensor bracket from the body.



e.
C364091

Remove the bolt and disconnect the speed sensor bracket from the front stabilizer link bracket.


f.

Remove the bolt and disconnect the speed sensor bracket from the suspension upper arm.


g.
C364090

Remove the bolt and disconnect the speed sensor bracket from the steering knuckle.


h.

Remove the bolt and front speed sensor LH from the steering knuckle.

NOTICE:

Prevent foreign matter from attaching to the sensor tip.