Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VACUUM SENSOR
RM2850E _54 Brake _073264 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0358163 VACUUM SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VACUUM SENSOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL VACUUM SENSOR ASSEMBLY

a.
C364109

Connect the 2 vacuum hoses to the vacuum sensor assembly.


b.

Connect the 2 connectors to the vacuum sensor assembly.


c.

Attach the guide to temporarily install the vacuum sensor assembly.


d.

Install the nut.

Torque:

8.0N*m ( 82kgf*cm , 71in.*lbf )



Hide 2.INSTALL INSTRUMENT PANEL ASSEMBLY