Home › Drivetrain › A861E (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSMISSION CONTROL CABLE › from 2019.08
RM2850E _52 Drivetrain _082622 A861E AUTOMATIC TRANSMISSION / TRANSAXLE _0399389 TRANSMISSION CONTROL CABLE A

A861E AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 1.SECURE VEHICLE

a.
C368705

Fully apply the parking brake and chock a wheel.

CAUTION:
·

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 58521D 2.REMOVE ENGINE SERVICE HOLE COVER MAT

Hide 58420 3.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY

Hide 58410 4.REMOVE ENGINE SERVICE HOLE COVER

Hide 33820B 6.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C102377

Remove the clip and washer and disconnect the transmission control cable assembly from the transmission floor shift assembly.


b.
C178308

Remove the clip.


c.

Remove the bolt and clamp.


d.
C419256C01
0,0 0,0 false
V100135

Bolt
V100136

Nut and washer
V100137

Clip


Remove the clip, nut and washer, and then disconnect the transmission control cable assembly.


e.

Remove the bolt and transmission control cable assembly.