1. CHECK REAR WHEEL CYLINDER FLUID PRESSURE
Set the rear axle load.
| Vehicle Model | Rear Axle Load
N (kgf, lbf) |
|---|---|
| BZB70R-ZCMSC5 | 19470 N (1985 kgf, 4377.0 lbf) |
| HZB70L-ZGMNS | 22050 N (2248 kgf, 4957.0 lbf) |
| HZB70L-ZGMNSV | 22050 N (2248 kgf, 4957.0 lbf) |
| HZB70L-ZGMRS | 22050 N (2248 kgf, 4957.0 lbf) |
| HZB70L-ZGMSS | 22050 N (2248 kgf, 4957.0 lbf) |
| HZB70L-ZGMSSV | 22050 N (2248 kgf, 4957.0 lbf) |
| HZB70L-ZGMTS | 22050 N (2248 kgf, 4957.0 lbf) |
| HZB70L-ZXMSS | 22050 N (2248 kgf, 4957.0 lbf) |
| HZB70L-ZXMSSV | 22050 N (2248 kgf, 4957.0 lbf) |
| HZB70R-ZGMNS | 22050 N (2248 kgf, 4957.0 lbf) |
| HZB70R-ZGMSS | 22050 N (2248 kgf, 4957.0 lbf) |
| XZB70R-ZEMQY | 18690 N (1906 kgf, 4201.7 lbf) |
| XZB70R-ZEMSY | 19470 N (1985 kgf, 4377.0 lbf) |
| XZB70R-ZEMSYQ | 19470 N (1985 kgf, 4377.0 lbf) |
| XZB70R-ZEPNYQ | 19470 N (1985 kgf, 4377.0 lbf) |
| XZB70R-ZEPQY | 18690 N (1906 kgf, 4201.7 lbf) |
| XZB70R-ZEPSY | 19470 N (1985 kgf, 4377.0 lbf) |
| XZB70R-ZEPSYQ | 19470 N (1985 kgf, 4377.0 lbf) |
| XZB80R-ZEMQY5 | 23520 N (2398 kgf, 5287.5 lbf) |
| XZB80R-ZEPQY5 | 23520 N (2398 kgf, 5287.5 lbf) |
Install SST to the front and rear wheel cylinders.
Bleed the air from the brake system (Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (w/o Brake pedal Load Sensing Switch)>BLEEDING).
Measure the rear wheel cylinder fluid pressure.
Raise the front wheel cylinder fluid pressure to 7850 kPa (80.0 kgf/cm2, 1138 psi) by pressing the brake pedal, and measure the rear wheel cylinder fluid pressure.
| Vehicle Model | Standard rear wheel cylinder pressure |
|---|---|
| BZB70R-ZCMSC5 | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| HZB70L-ZGMNS | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| HZB70L-ZGMNSV | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| HZB70L-ZGMRS | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| HZB70L-ZGMSS | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| HZB70L-ZGMSSV | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| HZB70L-ZGMTS | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| HZB70L-ZXMSS | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| HZB70L-ZXMSSV | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| HZB70R-ZGMNS | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| HZB70R-ZGMSS | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| XZB70R-ZEMQY | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| XZB70R-ZEMSY | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| XZB70R-ZEMSYQ | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| XZB70R-ZEPNYQ | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| XZB70R-ZEPQY | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| XZB70R-ZEPSY | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| XZB70R-ZEPSYQ | 5800 to 5900 kPa (59.2 to 60.1 kgf/cm2, 841 to 855 psi) |
| XZB80R-ZEMQY5 | 6830 to 7830 kPa (69.7 to 79.8 kgf/cm2, 991 to 1135 psi) |
| XZB80R-ZEPQY5 | 6830 to 7830 kPa (69.7 to 79.8 kgf/cm2, 991 to 1135 psi) |
The pedal should not be depressed twice or released while the front wheel cylinder fluid pressure is being set.
Read the value of the rear wheel cylinder fluid pressure after adjusting and holding the front wheel cylinder fluid pressure for 2 seconds.
2.ADJUST LOAD SENSING W/SPRING VALVE ASSEMBLY
Adjust the length of the No. 2 load sensing spring shackle.
| *1 | Lock Nut |
Low pressure - Lengthen A
High pressure - Shorten A
90 mm (3.54 in.)
84 to 96 mm (3.31 to 3.77 in.)
One turn of the No. 2 shackle nut changes the fluid pressure to about the following specifications.
Changes by 130 kPa (1.3 kgf/cm2, 19 psi) for one turn lock nut change in length
Tighten the lock nut.
12.5 N*m (127 kgf*cm, 9 ft.*lbf)
If the pressure cannot be adjusted by the No. 2 load sensing spring shackle, raise or lower the load sensing proportioning valve.
Loosen the 2 nuts.
Adjust the load sensing proportioning valve position.
Low pressure - Lower
High pressure - Raise
Tighten the nuts.
12.5 N*m (127 kgf*cm, 9 ft.*lbf)
Adjust the length of the No. 2 load sensing spring shackle again. If it cannot be adjusted, inspect the load sensing proportioning valve.
Remove SST.
Bleed the air from the brake line (Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (w/o Brake pedal Load Sensing Switch)>BLEEDING).
Inspect for brake fluid leaks.
3. CHECK VALVE BODY
Check that the master cylinder rear brake fluid pressure changes according to the rear wheel cylinder pressure.
| Vehicle Model | Master Cylinder Pressure | Wheel Cylinder Pressure |
|---|---|---|
| BZB70R-ZCMSC5 | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| HZB70L-ZGMNS | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| HZB70L-ZGMNSV | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| HZB70L-ZGMRS | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| HZB70L-ZGMSS | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| HZB70L-ZGMSSV | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| HZB70L-ZGMTS | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| HZB70L-ZXMSS | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| HZB70L-ZXMSSV | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| HZB70R-ZGMNS | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| HZB70R-ZGMSS | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| XZB70R-ZEMQY | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| XZB70R-ZEMSY | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| XZB70R-ZEMSYQ | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| XZB70R-ZEPNYQ | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| XZB70R-ZEPQY | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| XZB70R-ZEPSY | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| XZB70R-ZEPSYQ | 7850 kPa (80.0 kgf/cm2, 1138 psi) | 5360 to 6360 kPa (54.7 to 64.8 kgf/cm2, 777 to 922 psi) |
| XZB80R-ZEMQY5 | 10790 kPa (110.0 kgf/cm2, 1565 psi) | 7820 to 9020 kPa (79.8 to 91.9 kgf/cm2, 1134 to 1308 psi) |
| XZB80R-ZEPQY5 | 10790 kPa (110.0 kgf/cm2, 1565 psi) | 7820 to 9020 kPa (79.8 to 91.9 kgf/cm2, 1134 to 1308 psi) |