58521D
1.REMOVE ENGINE SERVICE HOLE COVER MAT
58410
2.REMOVE ENGINE SERVICE HOLE COVER
58734B
3.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP
58420
4.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY
5.REMOVE EXHAUST GAS TEMPERATURE SENSOR (for EGR Cooler Side)
Disconnect the exhaust gas temperature sensor connector (for EGR Cooler Side) and detach the clamp.
Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor (for EGR Cooler Side).
6.REMOVE EXHAUST GAS TEMPERATURE SENSOR
Disconnect the exhaust gas temperature sensor connector and detach the 4 clamps.
Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.
7.REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR
Disconnect the No. 2 exhaust gas temperature sensor connector and detach the clamp.
Using a 17 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.
8.REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR
Disconnect the No. 3 exhaust gas temperature sensor connector and detach the clamp.
Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.
9.REMOVE NO. 4 EXHAUST GAS TEMPERATURE SENSOR
Disconnect the No. 4 exhaust gas temperature sensor connector and detach the clamp.
Using a 14 mm union nut wrench, remove the No. 4 exhaust gas temperature sensor.
10.REMOVE NO. 5 EXHAUST GAS TEMPERATURE SENSOR
Disconnect the No. 5 exhaust gas temperature sensor connector and detach the clamp.
Using a 14 mm union nut wrench, remove the No. 5 exhaust gas temperature sensor.