Home › Engine / Hybrid System › N04C-WA (EMISSION CONTROL) › EXHAUST FUEL ADDITION INJECTOR › from 2019.08
RM2850E _51 Engine / Hybrid System _082614 N04C-WA EMISSION CONTROL _0400256 EXHAUST FUEL ADDITION INJECTOR A

N04C-WA EMISSION CONTROL  EXHAUST FUEL ADDITION INJECTOR  REMOVAL  


PROCEDURE

Hide 51405A 1.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 16028 4.DISCONNECT NO. 2 TURBO WATER PIPE SUB-ASSEMBLY AND NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A450503

Disconnect the connector from the exhaust fuel addition injector assembly.

NOTICE:

When disconnecting the connector, do not strongly push or pull the connector of the exhaust fuel addition injector assembly.



b.

Detach the clamp and disconnect the wire harness.


c.
A450504

Remove the 2 union bolts and 2 gaskets, and then disconnect the No. 2 turbo water pipe sub-assembly and No. 4 water by-pass pipe sub-assembly from the exhaust pipe.


d.

Remove the nut and clamp.


Hide 23811H 5.DISCONNECT NO. 1 FUEL PIPE

a.
A252314

Remove the union bolt and gasket, and then disconnect the No. 1 fuel pipe from the fuel delivery pipe.


Hide 87378C 7.REMOVE EXHAUST PIPE

a.
A252315C01
1.45,2.971 1.636,3.126 0.185,0.155 10 *1 1.567,2.33 1.567,2.936 false
*1 Gasket


Remove the 3 bolts, 3 washers and exhaust pipe from the front exhaust pipe assembly.


b.

Remove the gasket from the front exhaust pipe assembly.


Hide 23814D 8.REMOVE FUEL DELIVERY PIPE

NOTICE:

During work, make sure that parts are free of foreign matter and water.


a.
A252316

Remove the bolt and fuel delivery pipe from the exhaust pipe and exhaust fuel addition injector assembly.


Hide 23710B 9.REMOVE EXHAUST FUEL ADDITION INJECTOR ASSEMBLY

NOTICE:

During work, make sure that parts are free of foreign matter and water.


a.
A252317C01
2.531,1.406 3.042,1.406 false 1.063,0.688 1.573,0.688 false 0.958,1.323 1.469,1.323 false 1,1.75 1.167,1.75 1.167,1.75 1.469,1.604 false 3.094,1.323 3.406,1.542 0.313,0.219 10 false *1 0.865,0.604 1.26,0.854 0.396,0.25 10 false *2 0.76,1.25 1.083,1.49 0.323,0.24 10 false *3 0.802,1.677 1.083,1.906 0.281,0.229 10 false *4
*1 No. 2 Nozzle Holder Clamp
*2 Exhaust Fuel Addition Injector Assembly
*3 O-Ring
*4 Gasket


Remove the bolt and No. 2 nozzle holder clamp from the exhaust pipe.

NOTICE:

When disconnecting the connector or removing and installing the exhaust fuel addition injector assembly when checking and cleaning parts, make sure not to pull the wire harness, hook or push the connector with your finger or damage the connector.



b.

Remove the exhaust fuel addition injector assembly, O-ring and gasket from the exhaust pipe.