Home › Engine / Hybrid System › N04C-WA (EMISSION CONTROL) › MONOLITHIC CONVERTER › from 2019.08
RM2850E _51 Engine / Hybrid System _082614 N04C-WA EMISSION CONTROL _0400258 MONOLITHIC CONVERTER A

N04C-WA EMISSION CONTROL  MONOLITHIC CONVERTER  INSTALLATION  


PROCEDURE

Hide 18450 1.INSTALL MONOLITHIC CONVERTER ASSEMBLY

a.
A448761N01
2.073,2.125 2.26,2.292 0.188,0.167 10 true 1 0.865,3.927 1.021,4.083 0.156,0.156 10 false 2 1.458,4.302 1.604,4.469 0.146,0.167 10 false 5 2.469,4.104 2.615,4.271 0.146,0.167 10 false 7 2.677,3.302 2.833,3.458 0.156,0.156 10 true 3 2.479,2.667 2.615,2.833 0.135,0.167 10 true 9 0.927,2.115 1.083,2.271 0.156,0.156 10 false 6 0.635,2.563 0.792,2.729 0.156,0.167 10 false 4 0.563,3.198 0.719,3.365 0.156,0.167 10 false 8

Install a new exhaust pipe gasket to the monolithic converter assembly.


b.

Temporarily install the No. 3 exhaust pipe support bracket and center exhaust pipe sub-assembly to the monolithic converter assembly with the 9 bolts and 9 nuts.


c.

Tighten the 9 bolts and 9 nuts in the order shown in the illustration.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)


d.

Install a new exhaust pipe spacer and new pipe clamp with the bolt and nut.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 17460 2.INSTALL CATALYTIC WITH PIPE CONVERTER ASSEMBLY

a.
A448760N01
2.521,2.125 2.677,2.302 0.156,0.177 10 false 1 1.396,3.917 1.552,4.094 0.156,0.177 10 false 2 1.365,2.115 1.521,2.292 0.156,0.177 10 false 6 1.083,2.594 1.219,2.74 0.135,0.146 10 true 4 1.063,3.177 1.219,3.354 0.156,0.177 10 false 8 1.948,4.302 2.104,4.479 0.156,0.177 10 false 5 2.958,4.083 3.115,4.26 0.156,0.177 10 false 7 3.146,3.302 3.302,3.479 0.156,0.177 10 false 3 2.948,2.677 3.104,2.854 0.156,0.177 10 false 9

Install a new exhaust pipe gasket to the monolithic converter assembly.


b.

Temporarily install the No. 2 exhaust pipe support bracket and catalytic with pipe converter assembly to the monolithic converter assembly with the 9 bolts and 9 nuts.


c.

Tighten the 9 bolts and 9 nuts in the order shown in the illustration.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)


d.

Install a new exhaust pipe spacer and new pipe clamp with the bolt and nut.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 18040 3.INSTALL NO. 1 EXHAUST PIPE CONVERTER ASSEMBLY