Home › Engine / Hybrid System › N04C-WA (EMISSION CONTROL) › UREA SELECTIVE CATALYTIC REDUCTION SYSTEM › from 2019.08
RM2850E _51 Engine / Hybrid System _082614 N04C-WA EMISSION CONTROL _0400651 UREA SELECTIVE CATALYTIC REDUCTION SYSTEM C

N04C-WA EMISSION CONTROL  UREA SELECTIVE CATALYTIC REDUCTION SYSTEM  P060541  Internal Control Module Read Only Memory (ROM) Error General Checksum Failure  


DESCRIPTION

DCU (emission control ECU assembly) internal chip error is being checked in the DCU (emission control ECU assembly).

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate Memory
P060541 Internal Control Module Read Only Memory (ROM) Error General Checksum Failure Diagnosis Condition:
·

Ignition switch ON.


Malfunction Status:
·

DCU (emission control ECU assembly) internal malfunctions are continuously detected.


Malfunction Duration:
·

3 seconds or more.


DCU (emission control ECU assembly) Class A AdBlue consumption warning light:
Comes on
DTC stored

MONITOR DESCRIPTION

Description of malfunction

DCU (emission control ECU assembly) internal malfunction has been detected.


Reset condition

After having restored to the normal conditions.


CONFIRMATION DRIVING PATTERN

DTC No. DTC Detection Drive Pattern
P060541 Ignition switch ON for 20 seconds or more.

CAUTION / NOTICE / HINT

HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


NOTICE:

If the DCU (emission control ECU assembly) power supply is shut off forcibly, such as by disconnecting the battery before the pump operation ends, and the ABS MTR/DCU relay turns off after the ignition switch is turned off, P0605 may be detected.


PROCEDURE

1.CLEAR DTC
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Clear the DTCs.

NOTICE:

Clear the DTCs with the engine stopped, as DTCs cannot be cleared while the engine is running.



e.

Turn the ignition switch off and wait for at least 30 seconds.


f.

Check that the ABS MTR/DCU relay turns off and GTS communication is cut off.


Result:
Proceed to
NEXT



NEXT

2.CHECK WHETHER DTC OUTPUT RECURS (DTC P060541)
2.CHECK WHETHER DTC OUTPUT RECURS (DTC P060541)
a.

Drive the vehicle in accordance with the driving pattern described in the Confirmation Driving Pattern.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Enter the following menus: Powertrain / Urea Selective Catalytic Reduction / Trouble Codes.


f.

Read the DTCs.

Result:
Result Proceed to
DTC P060541 is output A
DTCs are not output B


NOTICE:

If the DCU (emission control ECU assembly) power supply is shut off forcibly, such as by disconnecting the battery before the pump operation ends, and the ABS MTR/DCU relay turns off after the ignition switch is turned off, P0605 may be detected.




A

3.REPLACE DCU (EMISSION CONTROL ECU ASSEMBLY)

B

4.CLEAR DTC
3.REPLACE DCU (EMISSION CONTROL ECU ASSEMBLY)
a.

Replace the DCU (emission control ECU assembly).

Click hereEngine / Hybrid System>N04C-WA (EMISSION CONTROL)>UREA PUMP CONTROL ECU>REMOVAL


Result:
Proceed to
NEXT



NEXT

4.CLEAR DTC
4.CLEAR DTC
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Clear the DTCs.

NOTICE:

Clear the DTCs with the engine stopped, as DTCs cannot be cleared while the engine is running.



e.

Turn the ignition switch off and wait for at least 30 seconds.


Result:
Proceed to
NEXT



NEXT

5.CHECK WHETHER DTC OUTPUT RECURS (DTC P060541)
5.CHECK WHETHER DTC OUTPUT RECURS (DTC P060541)
a.

Drive the vehicle in accordance with the driving pattern described in the Confirmation Driving Pattern.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Enter the following menus: Powertrain / Urea Selective Catalytic Reduction / Trouble Codes.


f.

Read the DTCs.

OK:

DTCs are not output



Result:
Proceed to
NEXT



NEXT

END