1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2.DISCHARGE FUEL
25608
3.REMOVE EGR COOLER SUB-ASSEMBLY
26100
4.REMOVE DIESEL THROTTLE BODY
53712C
5.REMOVE FRONT FENDER APRON LH
23804D
6.REMOVE NO. 4 FUEL PIPE SUB-ASSEMBLY
Remove the 2 union bolts from the No. 4 fuel pipe sub-assembly.
Be sure to prevent foreign matter or water from entering the lines.
Remove the 2 nuts and 2 fuel pipe clamps.
Disconnect the fuel tube.
Remove the 2 gaskets from the No. 4 fuel pipe sub-assembly.
Remove the No. 4 fuel pipe sub-assembly.
23083
7.REMOVE NO. 3 NOZZLE LEAKAGE PIPE SUB-ASSEMBLY
Remove the 2 union bolts, 2 gaskets and No. 3 nozzle leakage pipe sub-assembly.
Be sure to prevent foreign matter or water from entering the lines.
23812D
8.REMOVE NO. 2 FUEL PIPE
Remove the 2 nuts and 2 fuel pipe clamps.
Using a 17 mm union nut wrench, loosen the 2 union nuts.
Remove the No. 2 fuel pipe.
Be sure to prevent foreign matter or water from entering the lines.
23741B
9.REMOVE INJECTION PIPE CLAMP
Remove the 3 nuts and 6 injection fuel pipe clamps.
10.REMOVE INJECTION PIPE SUB-ASSEMBLY
Using a 17 mm union nut wrench, loosen the 8 union nuts and remove the injection pipe sub-assembly.
Be sure to prevent foreign matter or water from entering the lines.
23810A
11.REMOVE COMMON RAIL ASSEMBLY
|
Push |
|
Pull |
Disconnect the fuel pressure discharge valve connector as shown in the illustration.
|
Push |
|
Pull |
Disconnect the fuel pressure sensor connector as shown in the illustration.
Remove the 2 bolts, fuel support and common rail assembly.