Home › Engine / Hybrid System › N04C-WA (FUEL) › FUEL TANK › from 2019.08
RM2850E _51 Engine / Hybrid System _082613 N04C-WA FUEL _0400848 FUEL TANK A

N04C-WA FUEL  FUEL TANK  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FUEL TANK CUSHION

a.
A101687

Install 9 new fuel tank cushions.


Hide 77011 2.INSTALL LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY

a.
A146787

Install a new gasket and lower fuel tank filler pipe sub-assembly with the 8 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 3.INSTALL BREATHER TUBE FUEL HOSE

a.
A160520C02
0.792,0.167 1.104,0.323 0.313,0.156 10 false *a 0.844,1.292 1.156,1.448 0.313,0.156 10 false *b
*a Upper
*b 110°


Install the breather tube fuel hose to the lower fuel tank filler pipe and tighten the clamp.


Hide 77213B 4.INSTALL FUEL TANK TO FILLER PIPE HOSE

a.
A343068C02
0.854,0.156 1.167,0.313 0.313,0.156 10 false *a 0.479,1.146 0.792,1.302 0.313,0.156 10 false *b
*a Upper
*b 90°


Install the fuel tank to filler pipe hose to the lower fuel tank filler pipe and tighten the clamp.


Hide 77420 5.INSTALL NO. 2 FUEL CUT OFF VALVE ASSEMBLY

a.
A146784

Install the No. 2 fuel cut off valve assembly to the fuel tank.


Hide 77380 6.INSTALL FUEL CUT OFF VALVE ASSEMBLY

a.
A146783

Install the fuel cut off valve assembly to the fuel tank.


Hide 77026A 7.INSTALL NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY

a.
A344427C03
0,0 0,0 false
V100135

Screw
V100136

Nut


Install 2 new gaskets and the No. 1 fuel evaporation tube with the 8 screws and nut.

Torque:
Nut : 3.0 N*m (31 kgf*cm, 27 in.*lbf)
Screw : 1.5 N*m (15 kgf*cm, 13 in.*lbf)


Hide 77017B 8.INSTALL FUEL TANK VENT TUBE SUB-ASSEMBLY

a.

Install the grommet to the fuel tank.


b.
A452115C04
2.281,0.896 2.479,1.083 0.198,0.188 10 true *a 1.281,1.01 1.542,1.208 0.26,0.198 10 false *b 2.573,1.375 2.771,1.563 0.198,0.188 10 true *a 2.844,1.396 3.042,1.583 0.198,0.188 10 true *a 2.656,0.479 2.854,0.667 0.198,0.188 10 true *a 3.125,0.635 3.323,0.823 0.198,0.188 10 true *a 3.146,1.219 3.344,1.406 0.198,0.188 10 true *a
*a Bolt
*b Screw


Install a new gasket and the fuel tank vent tube with the 6 bolts and screw.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 83320 9.INSTALL FUEL SENDER GAUGE ASSEMBLY

Hide 77100 10.INSTALL FUEL TANK ASSEMBLY

a.

Set the fuel tank on an engine lifter.


b.

Raise the engine lifter.


c.
A146779

Connect the 2 fuel tank bands with the 2 bolts.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


Hide 77201A 11.CONNECT BREATHER TUBE FUEL HOSE

a.
A146790C02
0.646,0.198 0.823,0.375 0.177,0.177 10 false *a 0.635,1.188 0.948,1.385 0.313,0.198 10 false *b
*a Upper
*b 110°


Connect the breather tube fuel hose and tighten the clamp.


Hide 77213B 12.CONNECT FUEL TANK TO FILLER PIPE HOSE

a.
A146791C02
0.615,0.177 0.927,0.333 0.313,0.156 10 false *a 0.646,1.177 0.958,1.333 0.313,0.156 10 false *b
*a Upper
*b 90°


Connect the fuel tank to filler pipe hose and tighten the clamp.


Hide 77259C 13.CONNECT FUEL CHECK VALVE HOSE

a.
A424805

Connect the fuel check valve hose with the clamp.


Hide 14.CONNECT FUEL RETURN HOSE

a.
A146775

Connect the fuel return hose with the clamp.


Hide 15.CONNECT FUEL MAIN HOSE

a.
A146774

Connect the fuel main hose with the clamp.


Hide 58750 16.INSTALL FUEL TANK INSPECTION HOLE COVER ASSEMBLY

a.

Connect the fuel sender gauge assembly connector.


b.

Install the fuel tank inspection hole cover assembly with the 2 screws.


Hide 18.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL