Home › Engine / Hybrid System › N04C-WA (FUEL) › FUEL ADDITION CUT VALVE ASSEMBLY › from 2019.08
RM2850E _51 Engine / Hybrid System _082613 N04C-WA FUEL _0400951 FUEL ADDITION CUT VALVE ASSEMBLY A

N04C-WA FUEL  FUEL ADDITION CUT VALVE ASSEMBLY  REMOVAL  


PROCEDURE

Hide 58410 1.REMOVE ENGINE SERVICE HOLE COVER

Hide 58734B 2.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 23083 5.REMOVE NO. 3 NOZZLE LEAKAGE PIPE SUB-ASSEMBLY

Hide 23802E 6.REMOVE FUEL PIPE SUB-ASSEMBLY

a.
A450691

Remove the 2 union bolts, 2 gaskets and fuel pipe sub-assembly.

NOTICE:

Be sure to prevent foreign matter or water from entering the lines.



Hide 23801L 7.REMOVE FUEL FILTER TO INJECTION PUMP FUEL PIPE SUB-ASSEMBLY

a.
A450692

Remove the 2 union bolts from the fuel filter to injection pump fuel pipe sub-assembly.

NOTICE:

Be sure to prevent foreign matter or water from entering the lines.



b.
A450693

Remove the union bolt, gasket, nut and fuel filter to injection pump fuel pipe sub-assembly.

NOTICE:

Be sure to prevent foreign matter or water from entering the lines.



Hide 22214B 8.REMOVE FUEL ADDITION CUT VALVE ASSEMBLY

a.

Disconnect the fuel addition cut valve assembly connector.


b.
A450694

Remove the 2 bolts and fuel addition cut valve assembly.