Home › Engine / Hybrid System › N04C-WA (ENGINE CONTROL) › MANIFOLD ABSOLUTE PRESSURE SENSOR › from 2019.08
RM2850E _51 Engine / Hybrid System _082611 N04C-WA ENGINE CONTROL _0403591 MANIFOLD ABSOLUTE PRESSURE SENSOR A

N04C-WA ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89420M 1.INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

a.

Install the manifold absolute pressure sensor onto the intake pipe sub-assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Install the vacuum hose and slide the 2 hose clamps to secure the hose.


c.

Connect the connector to the manifold absolute pressure sensor.


Hide 58734B 3.INSTALL REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58410 4.INSTALL ENGINE SERVICE HOLE COVER

Hide 58521D 5.INSTALL ENGINE SERVICE HOLE COVER MAT