16520
1.INSTALL WATER FILLER ASSEMBLY
| *a | View A |
| *b | Upper Side |
| *c | LH Side |
Install the water filler assembly and slide the hose clamp to secure the hose.
Perform the installation with the hose clamp at the correct angle.
16571
2.INSTALL INLET RADIATOR HOSE
| *a | View A |
| *b | Upper Side |
Install the inlet radiator hose and slide the hose clamp to secure the hose.
Perform the installation with the hose clamp at the correct angle.
17940D
3.INSTALL INTERCOOLER ASSEMBLY
16400
4.INSTALL RADIATOR ASSEMBLY
| *1 | No. 1 Radiator Bracket |
| *2 | No. 2 Radiator Bracket |
| *3 | No. 3 Radiator Bracket |
|
Bolt A |
|
Bolt B |
|
Nut |
Install the radiator assembly with intercooler assembly to the vehicle.
Install the No. 2 radiator bracket with the 2 bolts.
Install the No. 1 radiator bracket with the 2 bolts and nut.
Install the No. 3 radiator bracket with the 3 bolts.
Connect the vacuum transmitting hose.
53167
5.INSTALL RADIATOR BRACE ROD RH
Install the radiator brace rod RH with the bolt and nut.
53168
6.INSTALL RADIATOR BRACE ROD LH
Install the radiator brace rod LH with the bolt and nut.
16520
7.CONNECT WATER FILLER ASSEMBLY
Connect the water filler assembly with the 2 bolts.
| *a | View A |
| *b | View B |
| *c | Upper Side |
| *d | Rear Side |
| *e | Front Side |
Connect the radiator reservoir hose, water by-pass hose and slide the 2 hose clamps to secure the hose.
Perform the installation with the hose clamp at the correct angle.
16571
8.CONNECT INLET RADIATOR HOSE
| *a | View A |
| *b | Upper Side |
| *c | RH Side |
Connect the inlet radiator hose and slide the hose clamp to secure the hose.
Perform the installation with the hose clamp at the correct angle.
17342F
9.CONNECT NO. 2 INTERCOOLER AIR HOSE
| *a | View A |
| *b | Upper Side |
| *c | LH Side |
Connect the No. 2 intercooler air hose and tighten the hose clamp to secure the hose.
Perform the installation with the hose clamp at the correct angle.
Tighten the screw at a rate of 2 seconds per turn.
17341K
10.CONNECT NO. 1 INTERCOOLER AIR HOSE
| *a | View A |
| *b | Upper Side |
| *c | RH Side |
Connect the No. 1 intercooler air hose and tighten the hose clamp to secure the hose.
Perform the installation with the hose clamp at the correct angle.
Tighten the screw at a rate of 2 seconds per turn.
16701
11.INSTALL FAN SHROUD SUB-ASSEMBLY