1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
88716E
2.DISCONNECT COOLER REFRIGERANT LIQUID PIPE E
Remove the bolt.
| *A | for RHD | *B | for LHD |
Loosen the nut and disconnect the refrigerant liquid pipe E.
Do not apply excessive force to the cooler refrigerant liquid pipe E.
Remove the O-ring.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88711
3.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE (for RHD, N04C Series Engine)
Remove the nut.
Loosen the nut and disconnect the No. 1 cooler refrigerant discharge hose.
Do not apply excessive force to the No. 1 cooler refrigerant discharge hose.
Remove the O-ring.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88715G
4.DISCONNECT DISCHARGE TUBE G
for RHD, 1HZ:
Remove the nut.
Loosen the nut and disconnect the discharge tube G.
Do not apply excessive force to the discharge tube G.
for LHD, N04C Series Engine:
Loosen the nut and disconnect the discharge tube G.
Do not apply excessive force to the discharge tube G.
Remove the O-ring.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88715J
5.DISCONNECT DISCHARGE TUBE J (for LHD, 1HZ, 2TR-FE)
Loosen the nut and disconnect the discharge tube J.
Do not apply excessive force to the discharge tube J.
Remove the O-ring.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
59401
6.REMOVE COOLER CONDENSER COVER SUB-ASSEMBLY
Remove the 8 screws and cooler condenser cover sub-assembly.
| *A | for RHD | *B | for LHD |
88415L
7.REMOVE NO. 8 DUST COVER
for Front Side:
Remove the 3 clips and the No. 8 dust cover.
| *A | for RHD | *B | for LHD |
for Rear Side:
Remove the 3 clips and the No. 8 dust cover.
| *A | for RHD | *B | for LHD |
88450
8.REMOVE CONDENSER ASSEMBLY WITH RECEIVER
Disconnect the 2 connectors.
| *A | for RHD | *B | for LHD |
Remove the 6 bolts and the condenser assembly with receiver.
Removing the condenser assembly with receiver from the vehicle must be performed by multiple people.
for Front Side:
| *A | for RHD | *B | for LHD |
for Rear Side:
| *A | for RHD | *B | for LHD |