Home › Engine / Hybrid System › N04C-WA (LUBRICATION) › OIL PRESSURE SWITCH › from 2019.08
RM2850E _51 Engine / Hybrid System _082618 N04C-WA LUBRICATION _0404094 OIL PRESSURE SWITCH A

N04C-WA LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Install the engine oil pressure switch assembly with a new gasket.

Torque:
24.5 N*m (250 kgf*cm, 18 ft.*lbf)


b.

Connect the connector.


c.

Install the wire insulator.