1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
51441D
2.REMOVE NO. 1 ENGINE UNDER COVER
51445D
3.REMOVE ENGINE UNDER COVER BRACKET RH
51446C
4.REMOVE ENGINE UNDER COVER BRACKET LH
53712C
5.REMOVE FRONT FENDER APRON LH
28100
6.REMOVE STARTER ASSEMBLY
Pull off the terminal cap and remove the nut, and disconnect the starter wire from terminal 30.
Disconnect the terminal 50 connector from the starter assembly.
| *a | Terminal 50 |
| *b | Terminal 30 |
Remove the bolt (A) and nut.
|
Bolt |
|
Nut |
Detach the 2 wire harness clamps and disconnect the No.2 engine wire.
w/ Bracket:
Remove the bolt (B) and the wire harness clamp bracket.
Remove the nut, bolt, and starter assembly.
|
Bolt |
|
Nut |