Home › Engine / Hybrid System › N04C-WA (STARTING) › IGNITION SWITCH › from 2019.08
RM2850E _51 Engine / Hybrid System _082619 N04C-WA STARTING _0406102 IGNITION SWITCH A

N04C-WA STARTING  IGNITION SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Before removing or installing the ignition switch assembly, make sure to turn the ignition switch to ACC.

If the ignition switch assembly is removed with the ignition switch not turned to ACC, when installed, it will not align with the position of the ignition switch lock cylinder assembly.


PROCEDURE

Hide 45287 1.REMOVE LOWER STEERING COLUMN COVER

Hide 45286B 2.REMOVE UPPER STEERING COLUMN COVER

Hide 69570 3.REMOVE IGNITION SWITCH LOCK CYLINDER ASSEMBLY

a.
A396337

Turn the ignition switch to ACC.


b.

Using a screwdriver, remove the ignition switch lock cylinder assembly.


Hide 84450 4.REMOVE IGNITION SWITCH ASSEMBLY

a.
A396340

for Automatic Transmission:

Remove the 2 screws and disconnect the keyinterlock solenoid.


b.
A396341

Detach the clamp and disconnect the connector.


c.
A396339

Remove the screw and the ignition switch assembly.

NOTICE:

Do not move the removed ignition switch assembly from the ACC position.

If moved from ACC, when installed, it will not align with the position of the ignition switch lock cylinder assembly.