Home › Engine / Hybrid System › N04C-WA (STARTING) › IGNITION SWITCH › from 2019.08
RM2850E _51 Engine / Hybrid System _082619 N04C-WA STARTING _0406102 IGNITION SWITCH A

N04C-WA STARTING  IGNITION SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

Before removing or installing the ignition or starter switch assembly, make sure to turn the ignition switch to ACC.

If the ignition or starter switch assembly is removed with the ignition switch not turned to ACC, when installed, it will not align with the position of the ignition switch lock cylinder assembly.


PROCEDURE

Hide 84450 1.INSTALL IGNITION SWITCH ASSEMBLY

a.

Install the ignition switch assembly with the screw.


b.

Attach the clamp and connect the connector.


c.

for Automatic Transmission:

Connect the key interlock solenoid to the upper steering column with switch bracket assembly with the 2 screws.


Hide 69570 2.INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY

a.
A449540N01
0.49,3.146 0.74,3.146 0.74,3.146 0.906,3.479 true 0.5,4.083 0.75,4.083 0.75,4.083 1,3.667 true 2.052,4.083 2.302,4.083 2.302,4.083 2.552,3.667 true 0.24,3.063 0.49,3.229 0.25,0.167 10 false *b 0.25,4 0.5,4.167 0.25,0.167 10 false *a 1.802,4 2.052,4.167 0.25,0.167 10 false *a

Check the camshaft position of the steering column with switch bracket assembly.

NOTICE:

Check that the stopper plate is positioned as shown in the illustration.


Text in Illustration
*a Camshaft
*b Stopper plate


b.
A396349

Turn the ignition switch to ACC.


c.

Install the ignition switch lock cylinder assembly.

NOTICE:

The ignition switch lock cylinder assembly should be installed completely.



Hide 45286B 3.INSTALL UPPER STEERING COLUMN COVER

Hide 45287 4.INSTALL LOWER STEERING COLUMN COVER