Home › Engine / Hybrid System › N04C-WA (EMISSION CONTROL) › UREA SENSOR › from 2019.08
RM2850E _51 Engine / Hybrid System _082614 N04C-WA EMISSION CONTROL _0406128 UREA SENSOR A

N04C-WA EMISSION CONTROL  UREA SENSOR  INSTALLATION  


PROCEDURE

Hide SG400 1.INSTALL UREA SENSOR ASSEMBLY

a.
A451112

Install a new O-ring to the urea sensor assembly.

NOTICE:

Do not damage the O-ring.



b.

Install the urea sensor assembly to the urea tank sub-assembly with the 3 bolts.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)