The atmospheric pressure sensor, built into the ECM, detects the atmospheric pressure. According to the value of the atmospheric pressure, the ECM corrects the injection timing, the injection volume and the amount of common rail assembly internal fuel pressure for an optimum combustion.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory |
|---|---|---|---|---|---|
| P2226 | Barometric Pressure Circuit | Open or short in atmospheric pressure sensor circuit for more than 0.5 seconds (ECM internal malfunction) (1 trip detection logic) | ECM | Comes on | DTC stored |
| P2228 | Barometric Pressure Circuit Low Input | Short in atmospheric pressure sensor circuit for more than 0.5 seconds (ECM internal malfunction) (1 trip detection logic) | ECM | Comes on | DTC stored |
| P2229 | Barometric Pressure Circuit High Input | Open in atmospheric pressure sensor circuit for more than 0.5 seconds (ECM internal malfunction) (1 trip detection logic) | ECM | Comes on | DTC stored |
| DTC No. | DTC Detection Drive Pattern |
|---|---|
| P2226
P2228 P2229 |
Ignition switch to ON for 1 seconds or more |
After replacing the ECM, the new ECM needs registration (Click hereEngine / Hybrid System>N04C-VJ (ENGINE CONTROL)>ECD SYSTEM>REGISTRATION) and initialization (Click hereEngine / Hybrid System>N04C-VJ (ENGINE CONTROL)>ECD SYSTEM>INITIALIZATION).
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Read the DTCs.
| Result | Proceed to |
|---|---|
| DTC P2226, P2228 or P2229 and other DTCs are output | A |
| DTC P2226, P2228 or P2229 is output | B |
A
B