Home › Engine / Hybrid System › N04C-VJ (ENGINE CONTROL) › ECD SYSTEM › from 2021.01
RM2850E _51 Engine / Hybrid System _096807 N04C-VJ ENGINE CONTROL _0454116 ECD SYSTEM C

N04C-VJ ENGINE CONTROL  ECD SYSTEM  U029D  Lost Communication with NOx Sensor "A"  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
U029D Lost Communication with NOx Sensor "A" Diagnosis Condition:
·

Ignition switch ON


Malfunction Status:

Disconnection between No. 1 nitrogen oxides sensor and CAN bus line is detected for 1.5 seconds


Malfunction Duration:

1.5 seconds or more


(1 trip detection logic)
·

No. 1 nitrogen oxides sensor

·

Harness or connector

·

ECM


Comes on DTC stored

CAUTION / NOTICE / HINT

NOTICE:

After replacing the ECM, the new ECM needs registration (Click hereEngine / Hybrid System>N04C-VJ (ENGINE CONTROL)>ECD SYSTEM>REGISTRATION) and initialization (Click hereEngine / Hybrid System>N04C-VJ (ENGINE CONTROL)>ECD SYSTEM>INITIALIZATION).


HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.CHECK DTC OUTPUT
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

According to the display on the GTS, select "Health Check".


e.

Check for currently output system DTCs.

Result:
Result Proceed to
DTC U029D is output A
DTCs are not output B




A

B