Home › Engine / Hybrid System › N04C-VJ (ENGINE CONTROL) › ECD SYSTEM › from 2021.01
RM2850E _51 Engine / Hybrid System _096807 N04C-VJ ENGINE CONTROL _0454116 ECD SYSTEM C

N04C-VJ ENGINE CONTROL  ECD SYSTEM  P1608  Engine Lack of Power  


DESCRIPTION

This DTC is stored if engine output decreases due to a malfunction in the intake or exhaust system, fuel system or cooling system.

Using the GTS, the conditions present when the DTC was stored can be confirmed by referring to the freeze frame data. Freeze frame data records engine conditions when a malfunction occurs. This information can be useful when troubleshooting.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P1608 Engine Lack of Power With the accelerator pedal fully depressed, engine output decreases for approximately 4 to 10 seconds due to a broken component in the intake or exhaust system, fuel system or cooling system or malfunction in one of those systems.
(1 trip detection logic)
·

Intake system clogged

·

EGR valve stuck closed

·

Deterioration of mass air flow meter (foreign matter present on sensor element etc.)

·

Intake system hose disconnected or cracked

·

Turbocharger sub-assembly vane stuck fully open

·

Manifold absolute pressure sensor

·

Manifold absolute pressure sensor out of range

·

Atmospheric pressure sensor (built into ECM)

·

Suction control valve sticking

·

Fuel leak

·

Fuel pressure sensor (built into common rail assembly)

·

Engine coolant leak

·

Radiator assembly clogged

·

Engine coolant temperature sensor

·

Engine coolant temperature sensor out of range or stuck

·

Diesel fuel filter assembly

·

Injector assembly

·

Fan


Does not come on DTC stored

CAUTION / NOTICE / HINT

HINT:
·

In contrast to normal malfunction diagnosis for components, circuits and systems, DTC P1608 is used to determine the malfunctioning area from the problem symptoms and freeze frame data when the user mentions problems such as engine lack of power or hesitation.

As the DTC can be stored as a result of certain user actions, even if the DTC is output, if the customer makes no mention of problems, clear the DTC without performing any troubleshooting and return the vehicle to the customer.

·

If any other DTCs are output, perform troubleshooting for those DTCs first.

·

Read freeze frame data using the GTS. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not, as well as other data recorded at the time of a malfunction.

·

When confirming the freeze frame data, be sure to check all 5 sets of freeze frame data.

·
A301856E28
2.24,0.938 3.083,1.167 0.844,0.229 10 false 0.5 seconds 0.344,0.938 1.188,1.167 0.844,0.229 10 false 0.5 seconds 1.323,0.927 2.167,1.156 0.844,0.229 10 false 0.5 seconds 0.406,2.813 2.844,3.031 2.438,0.219 10 false Freeze frame data recorded point 2.344,0.198 3.323,0.406 0.979,0.208 10 false DTC is stored 0.229,2.5 0.458,2.708 0.229,0.208 10 false 1 1.177,2.521 1.406,2.729 0.229,0.208 10 false 2 2.125,2.51 2.354,2.719 0.229,0.208 10 false 3 2.729,2.698 2.958,2.906 0.229,0.208 10 false 4 3.063,2.49 3.292,2.698 0.229,0.208 10 false 5

The fourth set of freeze frame data is the data recorded when the DTC is stored.



PROCEDURE

1.DTC OUTPUT (RECORD STORED DTC AND FREEZE FRAME DATA (PROCEDURE 1))
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.


e.

Record the stored DTC and freeze frame data.

HINT:

This freeze frame data shows the actual engine conditions when engine rack of power trouble occurred.



Result:
Proceed to
NEXT



NEXT

2.CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P1608)
2.CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P1608)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.


e.

Read the DTCs.

Result:
Result Proceed to
P1608 is output A
P1608 and other DTCs are output B


HINT:

If any DTCs other than DTC P1608 are output, troubleshoot those DTCs first.




A

B