Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR › from 2021.01
RM2850E _54 Brake _073264 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0358152 REAR SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR SPEED SENSOR LH

a.
C364098

Install the rear speed sensor LH with the bolt.

Torque:

8.5N*m ( 87kgf*cm , 75in.*lbf )


NOTICE:
·

Do not allow foreign matter to adhere to the tip of the speed sensor or the installation area.

·

Make sure not to strike or damage the sensor tip when installing it.

·

Do not tighten the bolt if the speed sensor is tilted.

·

Do not carry tools etc. with magnetic properties near the magnetic rotor.




Hide 2.INSTALL REAR SPEED SENSOR RH

HINT:

Use the same procedure described for the LH side.


Hide 3.INSTALL SKID CONTROL SENSOR WIRE

NOTICE:

When installing the speed sensor bracket and clamps, do not twist the wire harness.


a.
C364097

Attach the 3 clamps and connect the connector.


b.

for Type A:

Attach the guide to install the speed sensor bracket with the bolt.

Torque:

28N*m ( 286kgf*cm , 21 ft.*lbf )


C370926E01
0.094,0.063 0.406,0.26 0.313,0.198 10 false *a 3.542,0.104 3.854,0.302 0.313,0.198 10 false *b

Text in Illustration
*a for Type A *b for Type B


c.

for Type B:

install the speed sensor bracket with the bolt.

Torque:

18N*m( 184kgf*cm , 13 ft.*lbf )



d.

Connect the connector.


e.

Install the speed sensor bracket with the bolt.

Torque:

18N*m{ 184kgf*cm , 13 ft.*lbf }



f.
C364095

Attach the 4 clamps and connect the connector.


g.

Install the skid control sensor wire with the bolt.

Torque:

18N*m ( 184kgf*cm , 13 ft.*lbf )