Home › Vehicle Interior › AIR CONDITIONING › RECEIVER (except 1BZ-FPE) › 2019.08–2021.01
RM2850E _58 Vehicle Interior _073207 AIR CONDITIONING _0403622 RECEIVER(except 1BZ-FPE) A

AIR CONDITIONING  RECEIVER(except 1BZ-FPE)  INSTALLATION  


PROCEDURE

Hide 88471 1.INSTALL RECEIVER AIR CONDITIONING TANK

a.

Remove the vinyl tape wrapped around the connection of the cooler refrigerant liquid pipe A and receiver air conditioning tank.


b.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the cooler refrigerant liquid pipe A and receiver air conditioning tank.

Compressor Oil:

ND-OIL 8 or equivalent


NOTICE:

Do not use any compressor oil other than ND-OIL 8 or equivalent. If any compressor oil other than ND-OIL 8 or equivalent is used, compressor motor insulation performance may decrease, resulting in leakage of electric power.



c.

Install the 2 O-rings to the cooler refrigerant liquid pipe A.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free from foreign matter.



d.
E424172

Move the bracket as shown in the illustration and temporarily install the 2 receiver air conditioning tanks.


e.
E424170

Install the cooler refrigerant liquid pipe A with the 4 bolts.

NOTICE:

Make sure not to cut the O-ring while installing it. (Cut O-rings cannot be installed)


Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


f.
E424690

Install the under cover with the 7 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


Hide 88716B 2.INSTALL COOLER REFRIGERANT LIQUID PIPE B (for Type A)

Hide 88716B 3.INSTALL COOLER REFRIGERANT LIQUID PIPE B (for Type B)

Hide 88716L 4.INSTALL COOLER REFRIGERANT LIQUID PIPE L (for Type B)

Hide 59401 5.INSTALL COOLER CONDENSER COVER SUB-ASSEMBLY

Hide 8.INSPECT FOR REFRIGERANT LEAK