Home › Engine / Hybrid System › N04C-VJ (LUBRICATION) › ENGINE OIL COOLER › from 2021.01
RM2850E _51 Engine / Hybrid System _096893 N04C-VJ LUBRICATION _0461235 ENGINE OIL COOLER A

N04C-VJ LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 51441D 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 17201 2.REMOVE TURBOCHARGER SUB-ASSEMBLY

Hide 3.DISCONNECT WIRE HARNESS

a.
A448321

Detach the wire harness clamp.


Hide 16027 4.REMOVE TURBO WATER PIPE SUB-ASSEMBLY

a.
A484008

Remove the 3 union bolts, gasket, nut and turbo water pipe sub-assembly.


Hide 15700B 6.REMOVE OIL COOLER BRACKET

a.
A446922

Remove the bolt and oil cooler bracket.


Hide 7.REMOVE OIL COOLER COVER SUB-ASSEMBLY

a.
A446923

Remove the 15 bolts and oil cooler cover sub-assembly from the cylinder block.


b.

Remove the gasket and 4 O-rings.


Hide 15710 8.REMOVE OIL COOLER ASSEMBLY

a.
A446924

Remove the 4 nuts and oil cooler assembly.


b.

Remove the 2 gaskets.


Hide 15600D 9.REMOVE OIL FILTER PLUG

A446925

a.

Remove the 3 oil filter plugs and 3 O-rings.


b.
A446926

Remove the 3 oil filter plugs, 3 O-rings, 3 oil filter compression springs and 3 oil safety valve sub-assemblies.