Home › Engine / Hybrid System › N04C-VJ (INTAKE) › TURBOCHARGER › from 2021.01
RM2850E _51 Engine / Hybrid System _096894 N04C-VJ INTAKE _0461977 TURBOCHARGER A

N04C-VJ INTAKE  TURBOCHARGER  REMOVAL  


PROCEDURE

Hide 25608 1.REMOVE EGR COOLER SUB-ASSEMBLY

Hide 46700 2.REMOVE EXHAUST RETARDER ASSEMBLY

Hide 16027 3.REMOVE NO. 1 TURBO WATER PIPE

a.
A447447

Remove the union bolt, 2 gaskets, bolt and No. 1 turbo water pipe.


b.

Remove the O-ring from the No. 1 turbo water pipe.


Hide 15407 4.REMOVE TURBO OIL INLET PIPE SUB-ASSEMBLY

a.
A447448

Disconnect the engine oil pressure switch assembly connector.


b.

Remove the 2 union bolts, 4 gaskets, bolt and turbo oil inlet pipe sub-assembly.


Hide 16028 5.REMOVE NO. 2 TURBO WATER PIPE SUB-ASSEMBLY

a.
A447449

Detach the 2 wire harness clamps.


b.

Remove the union bolt, 2 gaskets and No. 2 turbo water pipe sub-assembly.


Hide 15474 6.REMOVE TURBO OIL OUTLET PIPE

a.
A447450C02
1.229,3.063 1.698,3.063 true 1.021,2.958 1.229,3.156 0.208,0.198 10 true *1
*1 No. 2 Water By-pass Pipe Sub-assembly


Remove the 2 bolts and disconnect the No. 2 water by-pass pipe sub-assembly from the turbo oil outlet pipe.


b.

Remove the 2 bolts, 2 gaskets and turbo oil outlet pipe.


Hide 17271 7.REMOVE NO. 1 TURBO INSULATOR

a.
A260447

Remove the 3 bolts and No. 1 turbo insulator.


Hide 17201 8.REMOVE TURBOCHARGER SUB-ASSEMBLY

HINT:

If a stud bolt is deformed or the threads are damaged, replace it.


a.
A252416

Remove the 4 nuts, 4 spacers, turbocharger sub-assembly and gasket.