Home › Engine / Hybrid System › N04C-VJ (ENGINE MECHANICAL) › FRONT CRANKSHAFT OIL SEAL › from 2021.01
RM2850E _51 Engine / Hybrid System _096892 N04C-VJ ENGINE MECHANICAL _0461241 FRONT CRANKSHAFT OIL SEAL A

N04C-VJ ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FRONT CRANKSHAFT OIL SEAL

a.

Apply MP grease to the front crankshaft oil seal lip.


b.
A257413N01
1.552,1.115 0.594,1.49 0.594,1.49 0.458,1.49 true 0.188,1.406 0.635,1.563 0.448,0.156 10 false SST

Using SST and a hammer, tap in a new front crankshaft oil seal to the timing gear cover so that the front crankshaft oil seal is flush with the timing gear edge.

SST
09223-78010  

NOTICE:
·

Be careful not to tap the front crankshaft oil seal at an angle.

·

Keep the gap between the gear case edge and the front crankshaft oil seal free of foreign matter.




Hide 13470 2.INSTALL CRANKSHAFT PULLEY ASSEMBLY

Hide 16701 3.INSTALL FAN SHROUD SUB-ASSEMBLY