Home › Engine / Hybrid System › N04C-VJ (COOLING) › FAN › from 2021.01
RM2850E _51 Engine / Hybrid System _096896 N04C-VJ COOLING _0462335 FAN A

N04C-VJ COOLING  FAN  INSTALLATION  


PROCEDURE

Hide 16371 1.INSTALL FAN PULLEY

a.

Install the fan pulley to the engine water pump assembly.


Hide 16361 2.INSTALL FAN

a.

Install the fan to the fluid coupling assembly with the 4 nuts.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)


Hide 16701 3.INSTALL FAN SHROUD SUB-ASSEMBLY

a.

Temporarily install the fan shroud sub-assembly together with the fluid coupling assembly.

NOTICE:

Be careful not to damage the radiator core.



b.

Install the fan shroud sub-assembly with the 4 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


c.

Temporarily install the fluid coupling assembly with the 4 nuts.


d.

Install the fan and generator V belt.

Click hereEngine / Hybrid System>N04C-VJ (ENGINE MECHANICAL)>DRIVE BELT>INSTALLATION


e.

Install the fluid coupling assembly with the 4 nuts.

Torque:
28.5 N*m (291 kgf*cm, 21 ft.*lbf)


f.

Engage the 3 hose clamps and install the radiator reservoir hose.


Hide 32922A 4.CONNECT OIL COOLER OUTLET HOSE

a.
A226340C02
1.625,2.073 1.885,2.219 0.26,0.146 10 true *a
*a Upper Side


Connect the oil cooler outlet hose and slide the hose clamp to secure the hose.

HINT:

Perform the installation with the hose clamp at the correct angle.



Hide 32921D 5.CONNECT OIL COOLER INLET HOSE

a.
A220178C02
1.635,2.042 1.865,2.229 0.229,0.188 10 true *a
*a Upper Side


Connect the oil cooler inlet hose and slide the hose clamp to secure the hose.

HINT:

Perform the installation with the hose clamp at the correct angle.



Hide 16572 6.CONNECT OUTLET RADIATOR HOSE

a.
A220176C02
0.073,0.083 0.385,0.281 0.313,0.198 10 false *a 1.656,0.104 1.969,0.302 0.313,0.198 10 false *c 2.219,0.656 2.531,0.854 0.313,0.198 10 false *d 2.063,1.135 2.375,1.333 0.313,0.198 10 false A 1.979,2.646 2.292,2.844 0.313,0.198 10 false B 0.094,3.542 0.406,3.74 0.313,0.198 10 false *b 1.073,3.958 1.385,4.156 0.313,0.198 10 false *e 1.656,3.438 1.969,3.635 0.313,0.198 10 false *c
*a View A
*b View B
*c Upper Side
*d RH Side
*e LH Side


Connect the outlet radiator hose and slide the 2 hose clamps to secure the hose.

HINT:

Perform the installation with the hose clamp at the correct angle.



Hide 88320 7.CONNECT COOLER COMPRESSOR ASSEMBLY

a.

Connect the cooler compressor assembly with the 6 bolts.

Torque:
46.6 N*m (475 kgf*cm, 34 ft.*lbf)


b.

Connect the connector.


Hide 88310A 8.INSTALL NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT

Hide 58701A 10.INSTALL FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY

Hide 33820B 11.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

Hide 58420 13.INSTALL NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY

Hide 58734B 14.INSTALL REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58410 15.INSTALL ENGINE SERVICE HOLE COVER

Hide 58521D 16.INSTALL ENGINE SERVICE HOLE COVER MAT

Hide 51441D 19.INSTALL NO. 1 ENGINE UNDER COVER