58521D
1.REMOVE ENGINE SERVICE HOLE COVER MAT
58410
2.REMOVE ENGINE SERVICE HOLE COVER
58734B
3.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP
58420
4.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY
58841A
5.REMOVE SHIFTING HOLE COVER
33820B
6.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
58701A
7.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY
8.DRAIN ENGINE COOLANT
53711C
9.REMOVE FRONT FENDER APRON RH
17113D
10.REMOVE INTAKE PIPE
Loosen the hose clamp and disconnect the No. 1 intercooler air hose.
Remove the bolt and 2 nuts.
Remove the intake pipe and gasket.
17700
11.REMOVE AIR CLEANER ASSEMBLY
17341F
12.REMOVE NO. 1 AIR HOSE
Detach the 4 wire harness clamps.
Loosen the hose clamp and disconnect the No. 3 pcv hose.
Remove the bolt.
Loosen the hose clamp and disconnect the No. 1 air hose from the turbo charger sub-assembly.
12601B
13.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
44360
14.DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY
Disconnect the 3 bolts and vane pump oil reservoir assembly.
44379A
15.REMOVE NO. 2 OIL RESERVOIR BRACKET
Remove the 3 bolts and No. 2 oil reservoir bracket.
12203
16.REMOVE PCV PIPE SUB-ASSEMBLY
Slide the 2 clips and remove the pcv hose.
Slide the clip and disconnect the No. 2 pcv hose.
Remove the 2 bolts and pcv pipe sub-assembly.
11409
17.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
Detach the 2 wire harness clamps.
Remove the bolt and engine oil level dipstick guide.
Remove the O-ring from the engine oil level dipstick guide.
18.REMOVE NO. 3 TURBO INSULATOR
Remove the 4 bolts and No. 3 turbo insulator.
19.REMOVE NO. 2 TURBO INSULATOR
Remove the 3 bolts and No. 2 turbo insulator.
17505H
20.REMOVE NO. 2 EXHAUST PIPE HEAT INSULATOR SUB-ASSEMBLY
Remove the 2 bolts and No. 2 exhaust pipe heat insulator sub-assembly.
25608
21.REMOVE EGR COOLER SUB-ASSEMBLY
Remove the 2 bolts and gasket.
Disconnect the water by-pass hose and reserve tank hose.
Disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose.
Remove the 4 bolts, EGR cooler sub-assembly and gasket.
25611
22.REMOVE EGR PIPE CONNECTOR
Remove the 3 nuts and 3 spacers.
Remove the EGR pipe connector and gasket from the EGR cooler sub-assembly.
17505G
23.REMOVE NO. 1 EXHAUST PIPE HEAT INSULATOR SUB-ASSEMBLY
Remove the 3 bolts and No. 1 exhaust pipe heat insulator sub-assembly from the EGR cooler sub-assembly.