Home › Engine / Hybrid System › N04C-VJ (EMISSION CONTROL) › MONOLITHIC CONVERTER › from 2021.01
RM2850E _51 Engine / Hybrid System _096890 N04C-VJ EMISSION CONTROL _0461599 MONOLITHIC CONVERTER A

N04C-VJ EMISSION CONTROL  MONOLITHIC CONVERTER  INSTALLATION  


PROCEDURE

Hide 18450 1.INSTALL MONOLITHIC CONVERTER ASSEMBLY

a.
A261560N01
2.453,3.997 2.557,4.168 0.104,0.171 10 1 1.64,2.281 1.744,2.452 0.104,0.171 10 7 0.713,3.412 0.817,3.583 0.104,0.171 10 6 2.674,3.283 2.777,3.454 0.104,0.171 10 5 1.017,4.109 1.12,4.281 0.104,0.171 10 4 1.631,4.245 1.735,4.417 0.104,0.171 10 8 2.377,2.583 2.48,2.754 0.104,0.171 10 3 0.906,2.655 1.009,2.826 0.104,0.171 10 2

Install a new exhaust pipe gasket to the monolithic converter assembly.


b.

Temporarily install the upper catalytic converter support bracket and monolithic converter assembly with the 8 nuts.


c.

Tighten the 8 nuts in the order shown in the illustration.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)


d.

Install a new front exhaust pipe spacer and new pipe clamp with the bolt and nut.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 17460 2.INSTALL CATALYTIC WITH PIPE CONVERTER ASSEMBLY

a.
A261559N02
0.708,3.302 0.823,3.479 0.115,0.177 10 false 1 0.938,4 1.052,4.177 0.115,0.177 10 false 8 2.594,3.771 2.708,3.948 0.115,0.177 10 false 7 1.021,2.594 1.135,2.771 0.115,0.177 10 false 6 2.344,4.094 2.458,4.271 0.115,0.177 10 false 5 1.635,2.448 1.75,2.625 0.115,0.177 10 true 4 1.729,4.229 1.844,4.406 0.115,0.177 10 false 3 2.667,3.385 2.781,3.563 0.115,0.177 10 false 2 2.469,2.708 2.583,2.885 0.115,0.177 10 false 9

Install a new exhaust pipe gasket to the monolithic converter assembly.


b.

Temporarily install the catalytic converter support bracket and catalytic with pipe converter assembly with the 9 nuts.


c.

Tighten the 9 nuts in the order shown in the illustration.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)


d.

Install a new front exhaust pipe spacer and new pipe clamp with the bolt and nut.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 17420 3.INSTALL CENTER EXHAUST PIPE ASSEMBLY