58521D
1.REMOVE ENGINE SERVICE HOLE COVER MAT
58410
2.REMOVE ENGINE SERVICE HOLE COVER
58734B
3.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP
58420
4.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY
58841A
5.REMOVE SHIFTING HOLE COVER
33820B
6.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
58701A
7.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY
51441D
8.REMOVE NO. 1 ENGINE UNDER COVER
9.DRAIN ENGINE COOLANT
88310A
10.REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT
88320
11.DISCONNECT COOLER COMPRESSOR ASSEMBLY
Disconnect the connector.
Remove the 6 bolts and disconnect the cooler compressor assembly.
It is not necessary to completely remove the cooler compressor assembly. With the hoses connected to the cooler compressor assembly, hang the cooler compressor assembly on the vehicle body with a rope.
16572
12.REMOVE OUTLET RADIATOR HOSE
Slide the 2 hose clamps and remove the outlet radiator hose.
32921D
13.DISCONNECT OIL COOLER INLET HOSE
Slide the hose clamp and disconnect the oil cooler inlet hose.
32922A
14.DISCONNECT OIL COOLER OUTLET HOSE
Slide the hose clamp and disconnect the oil cooler outlet hose.
16701
15.REMOVE FAN SHROUD SUB-ASSEMBLY
Loosen the 4 nuts from the fan pulley.
Remove the fan and generator V belt.
Click hereEngine / Hybrid System>N04C-VJ (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL
Remove the 4 nuts from the fan pulley.
Disengage the 3 hose clamps and disconnect the radiator reservoir hose.
Remove the 4 bolts from the fan shroud sub-assembly.
Remove the fluid coupling assembly and fan shroud sub-assembly.
Be careful not to damage the radiator core.
16361
16.REMOVE FAN
Remove the 4 nuts and fan from the fluid coupling assembly.
16371
17.REMOVE FAN PULLEY
Remove the fan pulley from the engine water pump assembly.