Home › Engine / Hybrid System › N04C-VJ (COOLING) › RADIATOR › from 2021.01
RM2850E _51 Engine / Hybrid System _096896 N04C-VJ COOLING _0462336 RADIATOR A

N04C-VJ COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 16520 1.INSTALL WATER FILLER ASSEMBLY

a.
A393010C02
0.073,2.198 0.385,2.396 0.313,0.198 10 false *a 0.927,2.74 1.24,2.938 0.313,0.198 10 false *c 1.625,2.063 1.938,2.26 0.313,0.198 10 false *b 1.917,0.646 2.115,0.854 0.198,0.208 10 false A
*a View A
*b Upper Side
*c LH Side


Install the water filler assembly and slide the hose clamp to secure the hose.

HINT:

Perform the installation with the hose clamp at the correct angle.



Hide 16571 2.INSTALL INLET RADIATOR HOSE

a.
A393011C02
1.427,0.26 1.583,0.396 0.156,0.135 10 true A 0.115,2.135 0.427,2.333 0.313,0.198 10 false *a 1.604,2.083 1.917,2.281 0.313,0.198 10 false *b
*a View A
*b Upper Side


Install the inlet radiator hose and slide the hose clamp to secure the hose.

HINT:

Perform the installation with the hose clamp at the correct angle.



Hide 17940D 3.INSTALL INTERCOOLER ASSEMBLY

Hide 16400 4.INSTALL RADIATOR ASSEMBLY

a.
A483852C01
2.844,1.531 2.844,1.865 2.844,1.865 3.01,1.865 true 0.354,1.448 0.521,1.448 0.521,1.448 0.677,1.865 true 0.625,2.615 0.625,2.792 0.625,2.792 0.458,2.792 true 0.188,1.385 0.5,1.583 0.313,0.198 10 false *3 3.052,1.813 3.365,2.01 0.313,0.198 10 false *1 0.281,2.729 0.594,2.927 0.313,0.198 10 false *2
*1 No. 1 Radiator Bracket
*2 No. 2 Radiator Bracket
*3 No. 3 Radiator Bracket
V100135

Bolt A
V100136

Bolt B
V100137

Nut


Install the radiator assembly with intercooler assembly to the vehicle.


b.

Install the No. 2 radiator bracket with the 2 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


c.

Install the No. 3 radiator bracket with the 2 bolts and nut.

Torque:
for bolt A : 18 N*m (184 kgf*cm, 13 ft.*lbf)
for nut : 20 N*m (204 kgf*cm, 15 ft.*lbf)


d.

Install the No. 1 radiator bracket with the 3 bolts.

Torque:
for bolt A : 18 N*m (184 kgf*cm, 13 ft.*lbf)
for bolt B : 12 N*m (122 kgf*cm, 9 ft.*lbf)


e.

Connect the vacuum transmitting hose.


Hide 53167 5.INSTALL RADIATOR BRACE ROD RH

a.

Install the radiator brace rod RH with the bolt and nut.

Torque:
for bolt : 18 N*m (184 kgf*cm, 13 ft.*lbf)
for nut : 20 N*m (204 kgf*cm, 15 ft.*lbf)


Hide 53168 6.INSTALL RADIATOR BRACE ROD LH

a.

Install the radiator brace rod LH with the bolt and nut.

Torque:
for bolt : 18 N*m (184 kgf*cm, 13 ft.*lbf)
for nut : 20 N*m (204 kgf*cm, 15 ft.*lbf)


Hide 16520 7.CONNECT WATER FILLER ASSEMBLY

a.

Connect the water filler assembly with the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


b.
A393012C02
1.792,0.073 2.021,0.271 0.229,0.198 10 false *c 1.094,0.563 1.323,0.76 0.229,0.198 10 false *d 0.104,3.583 0.333,3.781 0.229,0.198 10 false *b 1.75,3.583 1.979,3.781 0.229,0.198 10 false *c 1.063,4.073 1.292,4.271 0.229,0.198 10 false *e 0.063,0.063 0.292,0.26 0.229,0.198 10 false *a 1.854,2.135 1.969,2.302 0.115,0.167 10 true A 0.729,2.021 0.844,2.188 0.115,0.167 10 true B
*a View A
*b View B
*c Upper Side
*d Rear Side
*e Front Side


Connect the radiator reservoir hose, water by-pass hose and slide the 2 hose clamps to secure the hose.

HINT:

Perform the installation with the hose clamp at the correct angle.



Hide 16571 8.CONNECT INLET RADIATOR HOSE

a.
A220186C02
2.354,1.781 2.448,1.927 0.094,0.146 10 false A 2.521,2.823 2.677,2.969 0.156,0.146 10 false *c 0.063,2.167 0.219,2.313 0.156,0.146 10 false *a 1.698,2 1.854,2.146 0.156,0.146 10 false *b
*a View A
*b Upper Side
*c RH Side


Connect the inlet radiator hose and slide the hose clamp to secure the hose.

HINT:

Perform the installation with the hose clamp at the correct angle.



Hide 17342F 9.CONNECT NO. 2 INTERCOOLER AIR HOSE

a.
A220184C02
0.957,1.801 1.051,1.947 0.094,0.146 10 A 1.037,2.782 1.196,2.929 0.159,0.147 10 *c 0.026,2.185 0.185,2.332 0.159,0.147 10 *a 1.652,2.188 1.812,2.334 0.159,0.147 10 *b
*a View A
*b Upper Side
*c LH Side


Connect the No. 2 intercooler air hose and tighten the hose clamp to secure the hose.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

HINT:
·

Perform the installation with the hose clamp at the correct angle.

·

Tighten the screw at a rate of 2 seconds per turn.




Hide 17341K 10.CONNECT NO. 1 INTERCOOLER AIR HOSE

a.
A220182C02
2.875,1.621 2.965,1.764 0.09,0.143 10 A 1.648,2.193 1.809,2.335 0.16,0.143 10 *b 2.277,2.794 2.438,2.937 0.16,0.143 10 *c 0.074,2.186 0.234,2.329 0.16,0.143 10 *a
*a View A
*b Upper Side
*c RH Side


Connect the No. 1 intercooler air hose and tighten the hose clamp to secure the hose.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

HINT:
·

Perform the installation with the hose clamp at the correct angle.

·

Tighten the screw at a rate of 2 seconds per turn.




Hide 16701 11.INSTALL FAN SHROUD SUB-ASSEMBLY