Home › Engine / Hybrid System › N04C-VJ (STARTING) › STARTER › from 2021.01
RM2850E _51 Engine / Hybrid System _096897 N04C-VJ STARTING _0462932 STARTER A

N04C-VJ STARTING  STARTER  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 51441D 2.REMOVE NO. 1 ENGINE UNDER COVER

Hide 51445D 3.REMOVE ENGINE UNDER COVER BRACKET RH

Hide 51446C 4.REMOVE ENGINE UNDER COVER BRACKET LH

Hide 28100 6.REMOVE STARTER ASSEMBLY

a.
A396365E01
2.083,0.833 2.417,1.406 2.417,1.406 2.583,1.406 true 2,0.219 2.104,0.135 2.104,0.135 2.271,0.135 true 2.281,0.063 2.479,0.25 0.198,0.188 10 true *a 2.604,1.313 2.802,1.5 0.198,0.188 10 true *b

Pull off the terminal cap and remove the nut, and disconnect the starter wire from terminal 30.


b.

Disconnect the terminal 50 connector from the starter assembly.

Text in Illustration
*a Terminal 50
*b Terminal 30


c.
A449538E01
1.51,0.313 1.667,0.51 0.156,0.198 10 true A 2.615,0.51 2.771,0.708 0.156,0.198 10 true B

Remove the bolt (A) and nut.

Text in Illustration
V100135

Bolt
V100136

Nut


d.

Detach the 2 wire harness clamps and disconnect the No.2 engine wire.


e.

Remove the bolt (B) and the wire harness clamp bracket.


f.
A396334

Remove the nut, bolt and starter assembly.

Text in Illustration
V100135

Bolt
V100136

Nut