If a malfunction is detected in the engine control system, the ECM sends a malfunction signal to the skid control ECU (brake actuator assembly). The skid control ECU (brake actuator assembly) stores this DTC and prohibits the following controls:
VSC
TRC
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1201 | An engine control system malfunction signal continues for 1 second or more. | Engine control system |
Check the engine type.
| Result | Proceed to |
|---|---|
| N04C-VL | A |
| N04C-VJ | B |
| N04C-WA | C |
A
B
C
Check if any engine control system DTC is output (Click hereEngine / Hybrid System>N04C-VL (ENGINE CONTROL)>ECD SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Check if any engine control system DTC is output (Click hereEngine / Hybrid System>N04C-VJ (ENGINE CONTROL)>ECD SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Check if any engine control system DTC is output (Click hereEngine / Hybrid System>N04C-WA (ENGINE CONTROL)>ECD SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B